MARKETS

For circulation and spraying of mold-release agents, factory wastewater, and pumping of waste oil.

Mold-release agent, hydraulic oil/cutting oil, coolant liquid, waste oil, Sewage

Circulation and spraying of mold-release agent can be stopped at the end.
Can be used even if sludge or sludge is mixed in the liquid.

• Waste Liquids and waste water
• Oil change of heavy machinary

Drainage from power plants, waste liquid collection during piping and tank cleaning, fuel transfer in explosion-proof area

Rainwater, seawater, cleaning fluids, heavy oil, naphtha, solvents

Air-powered. Safe and secure for use in factories where explosion-proof protection is required.
Can be easily transported by trolley, etc., and highly versatile.

• Lithium-Ion Battery Manufacturing Process

Transfer of flammable liquids in explosion-proof area

Chemicals, additives, solvents

Air-powered. Safe and secure for use in factories where explosion-proof protection is required.
Can be easily transported by trolley, etc., and highly versatile.

• Semiconductor and chemical industries

• 60% Bentonite Clay, 20% HCL and 20% Water
• Pumping of silicate solids

Supplying oil, coolant fluid, paint, etc.

Oil, coolant fluid, paint, etc.

Empty operation is possible to drain oil and fuel.

• Car Manufacturer Primer Base Application

Transfer of food ingredients and additives, supply of pipe cleaning solution, collection of waste oil and wastewater

Food ingredients, disinfectants, food additives, alcohol, waste liquids

Easy disassembly and cleaning, with excellent operability.
Air-powered type, safe even around water.

• Pumping of melted chocolate and crème
• Pumping oil through filter press (cleaning)

Transfer of alcohol, disinfectants and solvents

Alcohol, disinfectants, solvents, formulations, water

Small pump size allows for space-saving installation.
Easy disassembly for cleaning.

Transfer of clay and glazes

Slurry, glaze

Slurry transfer is possible. Cutting off the flow at the end point is possible.

• Ceramic Industry Using Yamada Pumps
• Pumping abrasive ceramic material FFC (fine fire clay) used mainly for flat shaped wash-basins etc

Rainwater discharge, bilge and waste oil collection, chemical transfer, and lubricant supply

Bilge, rainwater, waste oil, chemicals, lubricating oil

Excellent self-suction capability, usable even when sludge or slurry is mixed in the liquid.

Transferring liquids mixed with sediment, wastewater, and oil

Sludge, fuel oil, oil

Can transfer even liquids mixed with sediment, and is used in mining and shale oil extraction.
High maintainability.

• Key Features of Yamada Pumps for Mining

As a coating pump for supplying paint to roll coaters, coating exterior wall materials, etc.

Paints, varnishes, lacquers, titanium dioxide, latex, low viscosity inks such as flexographic and gravure, solvents

Easy to adjust discharge volume, highly portable, easy disassembly and cleaning, allowing easy change of paint colors. Cutting off the flow at the end point achieves simplification of equipment.

• Spraying of paints and mold release agent

• Transport of Ink shielded from light

As a chemical supply system pump

Chemicals, pure water, waste liquids

Fluoroplastic wetted parts with a high corrosion resistance. Non-metallic specification eliminates the risk of contamination by metal ions.

Transfer of anhydrous powder

Diatomaceous earth, toner, powder paint, silica

Simplification of equipment, space-saving. Air-powered type for easy handling.