NDP-P25 series (Maximum corrosion resistance)
Maximum Corrosion Resistance Pump!
Safe Design with Intrinsically Explosion-proof Specification. Highly corrosion-resistant polypropylene (PP-GF) is used for the center body. A diaphragm pump that can be used to transport chemicals and a variety of conveying liquids.
Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
The safety structure does not require explosion-proof measures, so it can be used anywhere. The NDP-P25 series has a nominal diameter of 1" (25 mm) and a maximum flow rate of approximately 160 L/min. The maximum size solid is 3 mm or less.
■ Main Applications
Supply of Chemicals, Pure Water, and Waste Liquids/Transfer of Flammable Liquids in Explosion-proof Areas/Transfer of Food Ingredients and Additives/Supply of Pipe Cleaning Solution/Collection of Waste Oil and Wastewater/Transfer of Alcohol, Disinfectants and Solvents
Features
■ Highly Corrosion-resistant Polypropylene (PP-GF) is Used for the Center Body.
The product is resistant to corrosion and rust, making it suitable for transferring chemicals and a variety of conveying liquids.
■ Yamada’s Proprietary Design Air Switch Valve “C-Spool”
The air switch valve in the center section of the diaphragm pump is completely oil-free, so it does not require regular lubrication.
The operation assist using a C-spring suppresses stoppages during operation, and achieves stable operation.
◆ Air Switch Valve “C-Spool”
The C-spring Prevents Stoppages during Operation Achieves stable operation. |
Equipped with a Reset Button Downtime due to pump stoppages in the case of wear of the air switch valve is kept to a minimum. |
Completely Oil-free Both the air switch valve and the pilot valve that activates the air switch valve at the stroke limit are designed to be oil-free. Does not require regular lubrication. |
Simple Replacement No need to disassemble the pump when replacing it. |
Specifications
Body Material | A:Aluminum (ADC12) |
S:Stainless Steel (SCS14) |
P:GF Polypropylene(PP-GF) |
P:GF Polypropylene(PP-GF) |
V: CF Kynar(R) (PVDF-CF) |
V: CF Kynar(R)(PVDF-CF) | |
Diaphragm Material | |||||||
C: Neoprene (CR) |
NDP-P25BAC (854115) |
NDP-P25BSC (854129) |
NDP-P25BPC (854157) |
NDP-P25BPC-FL(854178) | - | - | |
N: Buna N (NBR) |
NDP-P25BAN (854116) |
NDP-P25BSN (854130) |
NDP-P25BPN (854158) |
NDP-P25BPN-FL(854179) | - | - | |
E: EPDM | NDP-P25BAE (854117) |
NDP-P25BSE (854131) |
NDP-P25BPE (854159) |
NDP-P25BPE-FL(854180) | NDP-P25BVE (854950) |
NDP-P25BVE-FL(854961) | |
V: Viton(R) (FKM) |
NDP-P25BAV (854118) |
NDP-P25BSV (854132) |
NDP-P25BPV (854160) |
NDP-P25BPV-FL(854181) | NDP-P25BVV (854951) |
NDP-P25BVV-FL(854962) | |
T: PTFE | NDP-P25BAT (854119) |
NDP-P25BST (854133) |
NDP-P25BPT (854161) |
NDP-P25BPT-FL(854182) | NDP-P25BVT (854952) |
NDP-P25BVT-FL(854963) | |
H: Hytrel(R) (TPEE) | NDP-P25BAH (854120) |
NDP-P25BSH (854134) |
NDP-P25BPH (854162) |
NDP-P25BPH-FL(854183) | NDP-P25BVH (854953) |
NDP-P25BVH-FL (854964 ) |
|
S: Santoprene(R) (TPO) | NDP-P25BAS (854121) |
NDP-P25BSS (854135) |
NDP-P25BPS (854163) |
NDP-P25BPS-FL (854184) |
- | - | |
H/T: Hytrel(R) (TPEE) | NDP-P25BAH/T (854217) |
NDP-P25BSH/T (854218) |
NDP-P25BPH/T (854220) |
NDP-P25BPH/T-FL (854221) |
- | - | |
Wetted Parts Materia | |||||||
Ball Valve | NDP-P25B○H: NBR NDP-P20B○H/T: PTFE Others: Same as the diaphragm material |
||||||
Valve Seat | SMS1025 | SUS316 | PP-GF | PVDF-CF | |||
Valve Stopper | ADC12 | SCS14 | |||||
Center Disk | NDP-P20BAT: A5056 Others: SUS316 |
SUS316 | PP-GF SCS13 (Insert material) |
PVDF-CF SCS13 (Insert material) |
|||
Specifications | |||||||
Nominal Diameter | 1" (25 mm) | ||||||
Material Connection |
Suction Port | Rc 1 | JIS flange10K 25A equivalent | Rc 1 | JIS flange 10K 25A equivalent | ||
Discharge Port | |||||||
Air Connection | Supply Port | Rc 3/8 | |||||
Exhaust Port | Rc 3/4 | ||||||
Air Supply Pressure | 0.2~0.7 MPa *1 | ||||||
Maximum Discharge Pressure | 0.7 MPa | ||||||
Water Discharge/Cycle | Fluorine resin diaphragm: 500 mL *2 Other diaphragm: 600 mL *2 | ||||||
Maximum Flow Rate | 160 L/min *3 | ||||||
Maximum Air Consumption | Fluorine resin diaphragm: 1800 L/min (ANR) Other diaphragm: 1600 L/min (ANR) | ||||||
Maximum Size Solid | Maximum 3 mm | ||||||
Suction Head Lift | NDP-P25B○T: 2 m Others: 5 m | ||||||
Net Weight | 11.0 kg | 18.0 kg | 9.5 kg | 9.5 kg | 12.0 kg | 12.0 kg |
*1 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
*2 The water discharge is provided as a rough approximation only. It will differ depending on the usage conditions, etc.
*3 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.