Drum Pump (Special specifications)
Convenient for Small Portioning Work from Drum Containers!
Safe Design with Intrinsically Explosion-Proof Specification.
A drum type diaphragm pump that is fitted in a drum container, allowing for the safe transfer of fuel and other solvents. The pump can be used with ease by simply inserting a suction pipe into the 2B bung of the drum container, and securing it with the included bung adaptor.
The DP-10B〇□-D series has a nominal diameter of 3/8" (10 mm), a maximum flow rate of approximately 18 L/min and a maximum size solid of 1 mm or less.
The NDP-20B〇□-D series has a nominal diameter of 3/4" (20 mm), a maximum flow rate of approximately 90 L/min and a maximum size solid of 2 mm or less.
Purchase the hose and discharge valve separately in accordance with the usage application.
Only aluminum (ADC12/AC2A/SGP) is available as the body material for the NDP-20 series, due to the net weight and operation aspects.
The suction tube method is recommended for the SUS material model.
■ Main Applications
Transfer of Fuel and Other Solvents from Drum Containers
Features
■ Convenient for Small Portioning Work from Drum Containers
Designed in a form that is easy to use for drum containers, based on the DP-10/NDP-20 series diaphragm pump.
The pump can be used with ease by simply inserting a suction pipe into the 2B bung of the drum container, and securing it with the included bung adaptor.
■ Yamada’s Proprietary Design Air Switch Valve “C-Spool "
The air switch valve in the center section of the diaphragm pump is completely oil-free, so it does not require regular lubrication.
The operation assist using a C-spring suppresses stoppages during operation, and achieves stable operation.
◆ Air Switch Valve “C-Spool”
| · The C-spring Prevents Stoppages during Operation Achieves stable operation. |
· Equipped with a Reset Button Downtime due to pump stoppages in the case of abrasion of the air switch valve is kept to a minimum. |
 |
 |
| · Completely Oil-free Both the air switch valve and the pilot valve that activates the air switch valve at the stroke limit are designed to be oil-free. Does not require regular lubrication. |
· Simple Replacement No need to disassemble the pump when replacing it. |
 |
Specifications
| Body Material | A: Aluminum (ADC12/SUS304) |
S: Stainless Steel (SCS14/SUS304) |
A: Aluminum (ADC12/AC2A/SGP) |
||
| Diaphragm Material | |||||
| C: Neoprene (CR) |
DP-10BAC-D (852918) |
DP-10BSC-D (852921) |
NDP-20BAC-D (851397) |
||
| N: Buna N (NBR) |
DP-10BAN-D (852919) |
DP-10BSN-D (852922) |
NDP-20BAN-D (851396) |
||
| T: PTFE |
DP-10BAT-D (852920) |
DP-10BST-D (852923) |
NDP-20BAT-D (851398) |
||
| H: Hytrel (R) (TPEE) |
DP-10BAH-D (852934) |
DP-10BSH-D (852935) |
NDP-20BAH-D (852827) |
||
| Wetted Parts Material |
Refer to the DP-10/NDP-20 specification table | ||||
| Specifications | |||||
| Nominal Diameter | 3/8" (10 mm) | 3/4" (20 mm) | |||
| Material Connection |
Suction Port | Ø17.3 O.D. | Ø34 O.D. | ||
| Discharge Port | Rc 3/8 | Rc 3/4 | |||
| Air Connection |
Supply Port | Rc 1/4 (W/air valve) | Rc 1/4 (W/air valve) | ||
| Exhaust Port | Rc 3/8 (W/silencer) | Rc 3/4 (W/silencer) | |||
| Air Supply Pressure | 0.2~0.7 MPa | ||||
| Maximum Discharge Pressure | 0.7 MPa | ||||
| Water Discharge/Cycle | 50 mL *1 | NDP-20BAT-D: 240 mL Others: 350 mL |
|||
| Maximum Flow Rate | 18 L/min *2 | NDP-20BAT-D: 85 L/min Others: 90 L/min |
|||
| Maximum Air Consumption | 300 L/min (ANR) | NDP-20BAT-D: 1300 L/min (ANR) Others: 1200 L/min (ANR) |
|||
| Maximum Size Solid | Maximum 1 mm | Maximum 2 mm | |||
| Net Weight | 4.5 kg | 6.2 kg | 10.7 kg | ||
| Accessory *3 | Suction pipe: 713237 (SUS304) Bung adaptor: 803665 (ADC12) *4 |
Suction pipe: 709406 (SGP) Bung adaptor: 803667 (SS400) |
|||
*1 The water discharge is provided as a rough approximation only. It will differ depending on the usage conditions, etc.
*2 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.
*3 The hose and gun are not included. Please purchase separately.
*4 The standard material of the bung adaptor for the DP-10-D series is “ADC12/A5056” aluminum. We build to order it with SUS304 for handling chemicals, by special order.