NDP-H40 series
Highest Discharge Pressure in the Industry!
Safe Design with Intrinsically Explosion-proof Specification.
Mechanical air switching valve for low-speed operation and push-in high pressure is equipped. This is a diaphragm pump ideal for filter presses, circulation operations, and supply pumps for spraying.
Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
The safety structure does not require explosion-proof measures, so it can be used anywhere.
The NDP-H40 series has a nominal diameter of 1·1/2" (40 mm) and a maximum flow rate of approximately 370 L/min.
The maximum size solid is 7 mm or less.
■ Main Applications
Supplying to the Filter Press/Circulation and Spraying of Mold Release Agent, Pumping Out Factory Wastewater and Waste Oil/Supplying Oil, Coolant Fluid, Paint, Etc.
Features
■ For High Discharge Pressure and Low Speed Operation
Achieves the highest discharge pressure in the industry of up to 0.85 MPa and stable stroke even at low speed operation.
■ Expanded Operating Pressure Range
Allows for reduced load on the material thanks to the low-pressure operation.
■ Specifications with Reduced Drive Air Loss
Specifications achieving energy-saving effects and enhancing the push-in pressure of the material are used.
◆Mechanical Switch
Achieves Low Pressure, Low Speed Operation, and Push-in High Pressure |
The actuation of the slide valve linked to the center rod connected to the left and right diaphragms enables the left and right stroke and reliable switching operation of the diaphragms. |
Specifications
Body Material | A: Aluminum (ADC12/AC4C-T6) |
S: Stainless Steel (SCS14) |
F: Cast Iron (FC250) |
P: GF Polypropylene(PP-GF) | |
Diaphragm Material | |||||
C: Neoprene (CR) |
NDP-H40BAC (854331) |
NDP-H40BSC (854347) |
NDP-H40BFC (854370) |
NDP-H40BPC (854386) |
|
N: Buna N (NBR) |
NDP-H40BAN (854332) |
NDP-H40BSN (854348) |
NDP-H40BFN (854371) |
NDP-H40BPN (854387) |
|
E: EPDM | NDP-H40BAE (854333) |
NDP-H40BSE (854349) |
NDP-H40BFE (854372) |
NDP-H40BPE (854388) |
|
V: Viton(R) (FKM) |
NDP-H40BAV (854334) |
NDP-H40BSV (854350) |
NDP-H40BFV (854373) |
NDP-H40BPV (854389) |
|
T: PTFE | NDP-H40BAT (854335) |
NDP-H40BST (854351) |
NDP-H40BFT (854374) |
NDP-H40BPT (854390) |
|
H: Hytrel(R) (TPEE) |
NDP-H40BAH (854336) |
NDP-H40BSH (854352) |
NDP-H40BFH (854375) |
NDP-H40BPH (854391) |
|
S: Santoprene(R) (TPO) |
NDP-H40BAS (854337) |
NDP-H40BSS (854353) |
NDP-H40BFS (854376) |
NDP-H40BPS (854392) |
|
H/T: Hytrel(R) (TPEE) |
NDP-H40BAH/T (854338) |
NDP-H40BSH/T (854354) |
NDP-H40BFH/T (854377) |
NDP-H40BPH/T (854393) |
|
Wetted Parts Material | |||||
Ball Valve | NDP-H40B○H/T: PTFE Others: Same as the diaphragm material | ||||
Valve Seat | NDP-H40BAT: A5056 Others: Same as the diaphragm material |
NDP-H40BST: SUS316 Others: Same as the diaphragm material |
NDP-H40BFT: SUS316 Others: Same as the diaphragm material |
PP | |
Valve Stopper | Same as the body material (integrated type) | ||||
Center Disk | A5056 | SUS316 | SS400 | PP-GF SCS13(Insert material) |
|
Specifications | |||||
Nominal Diameter | 1·1/2"(40 mm) | ||||
Material Connection | Suction Port | JIS flange 10K 40A equivalent |
Rc 1·1/2 | JIS flange 10K 40A equivalent |
|
Discharge Port | |||||
Air Connection | Supply Port | Rc 1/2 (W/air valve) | |||
Exhaust Port | Rc 3/4 (W/silencer) | ||||
Air Supply Pressure | NDP-H40B○T: 0.15~0.7 MPa *1 Others: 0.1~0.85 MPa *1 |
NDP-H40BPT: 0.15~0.7 MPa *1 Others: 0.1~0.7 MPa *1 |
|||
Maximum Discharge Pressure | NDP-H40B○T: 0.7 MPa Others: 0.85 MPa | 0.7 MPa | |||
Water Discharge/Cycle | Fluorine resin diaphragm: 0.9 L *2 Other diaphragm: 2.3 L *2 | ||||
Maximum Flow Rate | Fluorine resin diaphragm: 270 L/min *3 Other diaphragm: 370 L/min *3 |
Fluorine resin diaphragm: 250 L/min *3 Other diaphragm: 320 L/min *3 |
|||
Maximum Air Consumption | Fluorine resin diaphragm: 4000 L/min (ANR) Other diaphragm: 4500 L/min (ANR) | ||||
Maximum Size Solid | Maximum 7 mm | ||||
Suction Head Lift | NDP-H40B○T: 3 m Others: 5 m | ||||
Net Weight | NDP-H40BAT: 24.5 kg Others: 26.0 kg |
NDP-H40BST: 40.0 kg Others: 41.3 kg |
NDP-H40BFT: 42.8 kg Others: 44.0 kg |
24.0 kg |
*1 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
*2 The water discharge is provided as a rough approximation only. It will differ depending on the usage conditions, etc.
*3 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.
Dimentional drawing
Performance curve
Downloads
◆ Performance Curve
◆ Dimensional Drawings
◆ CAD Data
Parts List
Body Material | A: Aluminum (ADC12/AC4C-T6) |
S: Stainless Steel (SCS14) |
F:Cast Iron (FC250) |
P: GF Polypropylene (PP-GF) |
|
Diaphragm Material | |||||
C: Neoprene(CR) | NDP-H40BAC (854331) |
NDP-H40BSC (854347) |
NDP-H40BFC (854370) |
NDP-H40BPC (854386) |
|
N: Buna N(NBR) | NDP-H40BAN (854332) |
NDP-H40BSN (854348) |
NDP-H40BFN (854371) |
NDP-H40BPN (854387) |
|
E: EPDM | NDP-H40BAE (854333) |
NDP-H40BSE (854349) |
NDP-H40BFE (854372) |
NDP-H40BPE (854388) |
|
V: Viton(R)(FKM) | NDP-H40BAV (854334) |
NDP-H40BSV (854350) |
NDP-H40BFV (854373) |
NDP-H40BPV (854389) |
|
T: PTFE | NDP-H40BAT (854335) |
NDP-H40BST (854351) |
NDP-H40BFT (854374) |
NDP-H40BPT (854390) |
|
H: Hytrel(R)(TPEE) | NDP-H40BAH (854336) |
NDP-H40BSH (854352) |
NDP-H40BFH (854375) |
NDP-H40BPH (854391) |
|
S: Santoprene(R)(TPO) | NDP-H40BAS (854337) |
NDP-H40BSS (854353) |
NDP-H40BFS (854376) |
NDP-H40BPS (854392) |
|
H/T: Hytrel(R)(TPEE) | NDP-H40BAH/T (854338) |
NDP-H40BSH/T (854354) |
NDP-H40BFH/T (854377) |
NDP-H40BPH/T (854393) |