NDP-40-E series
Simple Structure and Easy Maintenance!
This model has a built-in high-frequency transmitting proximity sensor.
This diaphragm pump operates by detecting a sensor and controlling the switching of a solenoid valve.
Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
The NDP-40-E series has a nominal diameter of 1·1/2" (40 mm) and a maximum flow rate of approximately 280 L/min.
The maximum size solid is 7 mm or less.
*The NDP-E series Is Not Explosion-proof. This Series Is Built-to-order, So Be Sure to Confirm the Delivery Date.
■ Main Applications
Supplying to the Filter Press/Transfer of Inks and Pigments/Circulation and Spraying of Mold Release Agent, Pumping Out Factory Wastewater and Waste Oil/Supply of Paint to Roll Coater/Transfer of Clay and Glazes/Supplying Oil, Coolant Fluid, Paint, Etc.
Features
■ Sensor Control Model with Built-in Proximity Sensor that Transmits High Frequencies
The sensor built into the pump detects the stroke end, and the pump controller switches the solenoid valve to operate the pump.
◆ Sensor Control “Proximity Sensor”
Sensor Control = Stable Reciprocating Motion |
A proximity sensor detects the stroke end of the diaphragm, and the pump controller receiving the sensor signal controls the switching of the center exhaust type 3-position 5-port solenoid valve. |
Optional Counter Connection Enables Stroke Management |
By counting the number of times the center rod has moved, it is possible to determine when parts need to be replaced. |
Specifications
Body Material | A: Aluminum (ADC12/AC4C-T6) |
S: Stainless Steel (SCS14) |
F: Cast Iron (FC250) |
P: GF Polypropylene(PP-GF) | |
Diaphragm Material | |||||
C: Neoprene (CR) |
NDP-40BAC-E (853153) |
NDP-40BSC-E (853160) |
NDP-40BFC-E (853167) |
NDP-40BPC-E (853174) |
|
N: Buna N (NBR) |
NDP-40BAN-E (853149) |
NDP-40BSN-E (853156) |
NDP-40BFN-E (853163) |
NDP-40BPN-E (853170) |
|
E: EPDM | NDP-40BAE-E (853154) |
NDP-40BSE-E (853161) |
NDP-40BFE-E (853168) |
NDP-40BPE-E (853175) |
|
V: Viton(R) (FKM) |
NDP-40BAV-E (853152) |
NDP-40BSV-E (853159) |
NDP-40BFV-E (853166) |
NDP-40BPV-E (853173) |
|
T: PTFE | NDP-40BAT-E (853151) |
NDP-40BST-E (853158) |
NDP-40BFT-E (853165) |
NDP-40BPT-E (853172) |
|
H: Hytrel(R) (TPEE) | NDP-40BAH-E (853150) |
NDP-40BSH-E (853157) |
NDP-40BFH-E (853164) |
NDP-40BPH-E (853171) |
|
S: Santoprene(R) (TPO) | NDP-40BAS-E (853155) |
NDP-40BSS-E (853162) |
NDP-40BFS-E (853169) |
NDP-40BPS-E (853176) |
|
Wetted Parts Material | |||||
Ball Valve | Same as the diaphragm material | ||||
Valve Seat | NDP-40BAT-E: A5056 Others: Same as the diaphragm material |
NDP-40BST-E: SUS316 Others: Same as the diaphragm material |
NDP-40BFT-E: SUS316 Others: Same as the diaphragm material |
PP | |
Valve Stopper | Same as the body material (integrated type) | ||||
Center Disk | A5056 | SUS316 | SS400 | PP-GF SCS13(Insert material) |
|
Specifications | |||||
Nominal Diameter | 1·1/2"(40 mm) | ||||
Material Connection | Suction Port | JIS flange 10K 40A 相当 |
Rc 1·1/2 | JIS flange 10K 40A 相当 |
|
Discharge Port | |||||
Air Connection | Supply Port | Rc 1/2 x 2 (Shared supply and exhaust port x 2) *1 | |||
Exhaust Port | |||||
Air Supply Pressure | 0.2~0.7 MPa *2 | ||||
Maximum Discharge Pressure | 0.7 MPa | ||||
Water Discharge/Cycle | Fluorine resin diaphragm: 1.4 L *3 Other diaphragm: 2.8 L *3 | ||||
Maximum Flow Rate | Fluorine resin diaphragm: 230 L/min *4 Other diaphragm: 280 L/min *4 |
Fluorine resin diaphragm: 200 L/min *4 Other diaphragm: 270 L/min *4 |
|||
Maximum Air Consumption | Fluorine resin diaphragm: 3000 L/min (ANR) Other diaphragm: 2000 L/min (ANR) |
2000 L/min(ANR) | |||
Maximum Size Solid | Maximum 7 mm | ||||
Suction Head Lift | NDP-40B○T-E: 3 m Others: 5 m | ||||
Net Weight | 28.0 kg | 39.0 kg | 59.0 kg | 26.0 kg |
*1 The pipe length from the air supply valve (solenoid valve, etc.) to the pump shall be 1.5 m or less. If piping from the exhaust port of the air supply valve to another location, the pipe length to the end of the exhaust port shall be 5 m or less.
*2 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
*3 The water discharge is provided as a rough approximation only. It will differ depending on the usage conditions, etc. *4 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.
Dimentional drawing
Performance curve
Downloads
◆ Performance Curve
◆ Dimensional Drawings
◆ CAD Data
Parts List
Body Material | A: Aluminum (ADC12/AC4C-T6) |
S: Stainless Steel (SCS14) |
F:Cast Iron (FC250) |
P: GF Polypropylene (PP-GF) |
|
Diaphragm Material | |||||
C: Neoprene(CR) | NDP-40BAC-E (853153) |
NDP-40BSC-E (853160) |
NDP-40BFC-E (853167) |
NDP-40BPC-E (853174) |
|
N: Buna N(NBR) | NDP-40BAN-E (853149) |
NDP-40BSN-E (853156) |
NDP-40BFN-E (853163) |
NDP-40BPN-E (853170) |
|
E: EPDM | NDP-40BAE-E (853154) |
NDP-40BSE-E (853161) |
NDP-40BFE-E (853168) |
NDP-40BPE-E (853175) |
|
V: Viton(R)(FKM) | NDP-40BAV-E (853152) |
NDP-40BSV-E (853159) |
NDP-40BFV-E (853166) |
NDP-40BPV-E (853173) |
|
T: PTFE | NDP-40BAT-E (853151) |
NDP-40BST-E (853158) |
NDP-40BFT-E (853165) |
NDP-40BPT-E (853172) |
|
H: Hytrel(R)(TPEE) | NDP-40BAH-E (853150) |
NDP-40BSH-E (853157) |
NDP-40BFH-E (853164) |
NDP-40BPH-E (853171) |
|
S: Santoprene(R)(TPO) | NDP-40BAS-E (853155) |
NDP-40BSS-E (853162) |
NDP-40BFS-E (853169) |
NDP-40BPS-E (853176) |