180 Type (65 x 1) Divorced Pump Unit for Pails SR180P65PWAL-T

This pump unit is suitable for transferring extremely high-viscosity materials.
Its high pump ratio allows for high discharge pressure even at a low air supply pressure.
To prevent adhesion of anaerobic materials such as sealants and putty materials, a cup is attached to the gland section to hold the solution.

[Usable Containers]
JIS Z 1620 Steel Pail Equivalent, or Resin Container Equivalent to This

[Compatible Materials *]Grease NLGI #0~3, Adhesives
*A note concerning materials. This applies to all high-viscosity products.
· Cannot be used with materials that contain food or slurry.
· The applicable range of NLGI No. (grease consistency) is provided as a rough approximation only.
· It may be impossible to use the product with some greases depending on their properties, even if they are within the scope of application for the product.

Features

-T:Tube Indicator Plate

[Suitable Grease: No. 1~3]

The high sealing property of the packing makes it suitable for extremely high viscosity materials that require lift pressurization.

blacket.png

Specifications

Product No. 881160
Model SR180P65PWAL-T
Pump No. 854863
Maximum Discharge Pressure (MPa) 45.5
Material Connection Discharge Port Rc3/4
Air Connection Supply Port G3/8(F)
Operating Air Pressure Range (MPa) 0.2~0.7
Temp Range (°C) Ambient 0~60
Material Temperature 0~80
Water Discharge (mL)/Cycle 76
Net Weight (kg) 65

Dimentional drawing

SR180P65PWAL-T(881160)

SR180P65PWAL-T(881160)

Performance curve

Auto Switch & Oil Cap

Auto Switch Oil Cap: Sold as a Set of Three.
When attached to the air cylinder of a lift, it sends a signal externally when the lift is at the desired height. Filling the cup with solution when using high-viscosity materials such as adhesives prevents adhesion of the material oozing from the plunger section.
687062(SR140-SW) 716900:Oil Cylinder
682771:ValveSet of three
685775:O-ring
687062_auto_switch.jpg piston_oil_cup.jpg

Downloads

Parts List

Back to products list