NDP-P50 series (Maximum corrosion resistance)
![](https://ap.yamadacorp.co.jp/products/images/ndpp50-thumb-450x450-3377.jpg)
Maximum Corrosion Resistance Pump!
Safe Design with Intrinsically Explosion-proof Specification. Highly corrosion-resistant polypropylene (PP-GF) is used for the center body.
A diaphragm pump that can be used to transport chemicals and a variety of conveying liquids.
Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
The safety structure does not require explosion-proof measures, so it can be used anywhere.
The NDP-P50 series has a nominal diameter of 2" (50 mm) and a maximum flow rate of approximately 630 L/min.
The maximum size solid is 8 mm or less.
■ Main Applications
Supply of Chemicals, Pure Water, and Waste Liquids/Transfer of Flammable Liquids in Explosion-proof Areas/Transfer of Food Ingredients and Additives/Supply of Pipe Cleaning Solution/Collection of Waste Oil and Wastewater/Transfer of Alcohol, Disinfectants and Solvents
Features
■ Highly Corrosion-resistant Polypropylene (PP-GF) is Used for the Center Body.
The product is resistant to corrosion and rust, making it suitable for transferring chemicals and a variety of conveying liquids.
■ Yamada’s Proprietary Design Air Switch Valve “C-Spool”
The air switch valve in the center section of the diaphragm pump is completely oil-free, so it does not require regular lubrication.
The operation assist using a C-spring suppresses stoppages during operation, and achieves stable operation.
◆ Air Switch Valve “C-Spool”
The C-spring Prevents Stoppages during Operation Achieves stable operation. |
Equipped with a Reset Button Downtime due to pump stoppages in the case of wear of the air switch valve is kept to a minimum. |
![]() |
![]() |
Completely Oil-free Both the air switch valve and the pilot valve that activates the air switch valve at the stroke limit are designed to be oil-free. Does not require regular lubrication. |
Simple Replacement No need to disassemble the pump when replacing it. |
![]() |
Specifications
Body Material | P: GF Polypropylene (PP-GF) |
V: CF Kynar(R) (PVDF-CF) |
|
Diaphragm Material | |||
C: Neoprene (CR) |
NDP-P50BPC (854827) |
- | |
N: Buna N (NBR) |
NDP-P50BPN (854828) |
- | |
E: EPDM | NDP-P50BPE (854829) |
NDP-P50BVE (854843) |
|
V: Viton(R) (FKM) |
NDP-P50BPV (854830) |
NDP-P50BVV (854844) |
|
T: PTFE | NDP-P50BPT (854831) |
NDP-P50BVT (854845) |
|
H: Hytrel(R) (TPEE) | NDP-P50BPH (854832) |
NDP-P50BVH (854846) |
|
S: Santoprene(R) (TPO) | NDP-P50BPS (854833) |
NDP-P50BVS (854847) |
|
H/T: Hytrel(R) (TPEE) | NDP-P50BPH/T (854834) |
- | |
W: PTFE+EPDM | NDP-P50BPW (855305) |
NDP-P50BVW (855308) |
|
Body Material | |||
Ball Valve | NDP-P50B○H/T,B○W: PTFE Others: Same as the diaphragm material |
||
Valve Seat | PP | PTFE | |
Valve Stopper | Same as the body material (integrated type) | ||
Center Disk | PP-GF SCS13(Insert material) |
PVDF-CF SCS13(Insert material) |
|
Specifications | |||
Nominal Diameter | 2"(50 mm) | ||
Material Connection |
Suction Port | JIS flange 10K 50A equivalent | |
Discharge Port | JIS flange 10K 50A equivalent | ||
Air Connection | Supply Port | Rc 3/4 | |
Exhaust Port | Rc 1 | ||
Air Supply Pressure | 0.2~0.7 MPa *1 | ||
Maximum Discharge Pressure | 0.7 MPa | ||
Water Discharge/Cycle |
NDP-P50B○T: 2300mL *2 |
||
Maximum Flow Rate |
NDP-P50B○T: 560 L/min *3 |
||
Maximum Air Consumption |
NDP-P50B〇T: 5500 L/min (ANR) |
||
Maximum Size Solid | Maximum 8 mm | ||
Suction Head Lift | NDP-P50B○W: 2 m NDP-P50B○T: 3 m Others: 5 m | ||
Net Weight |
NDP-P50BPW:34.0 kg |
NDP-P50BVW:40.0 kg |
*1 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
*2 The water discharge is provided as a rough approximation only. It will differ depending on the usage conditions, etc.
*3 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.