NDP-H50/H500 series

Highest Discharge Pressure in the Industry!
Safe Design with Intrinsically Explosion-proof Specification.
Mechanical air switching valve for low-speed operation and push-in high pressure is equipped. This is a diaphragm pump ideal for filter presses, circulation operations, and supply pumps for spraying.
Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
The safety structure does not require explosion-proof measures, so it can be used anywhere.
The NDP-H50 series has a nominal diameter of 2" (50 mm) and a maximum flow rate of approximately 460 L/min.
The maximum size solid is 8 mm or less.

■ Main Applications
Application of Mold Release and Coating Agents/Circulation and Spraying of Mold Release Agent, Pumping Out Factory Wastewater and Waste Oil/Supplying Oil, Coolant Fluid, Paint, Etc.

Features

■ For High Discharge Pressure and Low Speed Operation

Achieves the highest discharge pressure in the industry of up to 0.85 MPa and stable stroke even at low speed operation.

■ Expanded Operating Pressure Range
Allows for reduced load on the material thanks to the low-pressure operation.

■ Specifications with Reduced Drive Air Loss
Specifications achieving energy-saving effects and enhancing the push-in pressure of the material are used.


◆Mechanical Switch

Achieves Low Pressure, Low Speed Operation, and Push-in High Pressure
The actuation of the slide valve linked to the center rod connected to the left and right diaphragms enables the left and right stroke and reliable switching operation of the diaphragms.

mechanical_switching.jpg

Specifications

Body Material A: Aluminum
(ADC12/AC4C-T6)
S: Stainless Steel
(SCS14)
F: Cast Iron
(FC250)
P: GF Polypropylene
(PP-GF)
NEW! H500 series
S: Stainless Steel
(SCS14)
Diaphragm Material
C: Neoprene
(CR)
NDP-H50BAC
(854402)
NDP-H50BSC
(854418)
NDP-H50BFC
(854441)
NDP-H50BPC
(854457)
NDP-H500BSC
(855405)
N: Buna N
(NBR)
NDP-H50BAN
(854403)
NDP-H50BSN
(854419)
NDP-H50BFN
(854442)
NDP-H50BPN
(854458)
NDP-H500BSN
(854406)
E: EPDM NDP-H50BAE
(854404)
NDP-H50BSE
(854420)
NDP-H50BFE
(854443)
NDP-H50BPE
(854459)
NDP-H500BSE
(855407)
V: Viton(R)
(FKM)
NDP-H50BAV
(854405)
NDP-H50BSV
(854421)
NDP-H50BFV
(854444)
NDP-H50BPV
(854460)
NDP-H500BSV
(855408)
T: PTFE NDP-H50BAT
(854406)
NDP-H50BST
(854422)
NDP-H50BFT
(854445)
NDP-H50BPT
(854461)
NDP-H500BST
(855409)
H: Hytrel(R)
(TPEE)
NDP-H50BAH
(854407)
NDP-H50BSH
(854423)
NDP-H50BFH
(854446)
NDP-H50BPH
(854462)
NDP-H500BSH
(855410)
S: Santoprene(R)
(TPO)
NDP-H50BAS
(854408)
NDP-H50BSS
(854424)
NDP-H50BFS
(854447)
NDP-H50BPS
(854463)
NDP-H500BSS
(855411)
H/T: Hytrel(R)
(TPEE)
NDP-H50BAH/T
(854409)
NDP-H50BSH/T
(854425)
NDP-H50BFH/T
(854448)
NDP-H50BPH/T
(854464)
NDP-H500BSH/T
(855412)
Wetted Parts Material
Ball Valve NDP-H50B○H/T: PTFE Others: Same as the diaphragm material NDP-H500BSH/T: PTFE
Others: Same as the diaphragm material
Valve Seat NDP-H50BAT: A5056
Others: Same as the diaphragm material
NDP-H50BST: SUS316
Others: Same as the diaphragm material
NDP-H50BFT: SUS316
Others: Same as the diaphragm material
PP NDP-H500BST: SUS316
Others: Same as the diaphragm material
Valve Stopper Same as the body material (integrated type) Same as the body material (integrated type)
Center Disk A5056 SUS316 SS400 PP-GF
SCS13(Insert material)
SUS316
Specifications
Nominal Diameter 2"(50 mm) 2"(50 mm)
Material Connection Suction Port JIS flange
10K 50A equivalent
Rc 2 JIS flange
10K 50A equivalent
JIS flange
10K 50A equivalent
Discharge Port
Air Connection Supply Port Rc 3/4 (W/air valve) Rc 3/4 (W/air valve)
Exhaust Port Rc 3/4 (W/silencer) Rc 3/4 (W/silencer)
Air Supply Pressure NDP-H50B○T: 0.15~0.7 MPa *1
Others: 0.1~0.85 MPa *1
NDP-H50BPT: 0.15~0.7 MPa *1
Others: 0.1~0.7 MPa *1
NDP-H500BST: 0.15~0.7 MPa *1
Others: 0.1~0.85 MPa *1
Maximum Discharge Pressure NDP-H50B○T: 0.7 MPa
Others: 0.85 MPa
0.7 MPa NDP-H500BST: 0.7 MPa
Others: 0.85 MPa
Water Discharge/Cycle Fluorine resin diaphragm: 1.3 L *2 Other diaphragm: 3.5 L *2 Fluorine resin diaphragm: 2.0 L *2 Other diaphragm: 3.7 L *2
Maximum Flow Rate Fluorine resin diaphragm: 340 L/min *3
Other diaphragm: 460 L/min *3
Fluorine resin diaphragm: 320 L/min *3
Other diaphragm: 460 L/min *3
Fluorine resin diaphragm: 470 L/min *3
Other diaphragm: 620 L/min *3
Maximum Air Consumption Fluorine resin diaphragm: 4000 L/min (ANR)
Other diaphragm: 4500 L/min (ANR)
Fluorine resin diaphragm: 4500 L/min (ANR)
Other diaphragm: 4000 L/min (ANR)
Fluorine resin diaphragm: 4400 L/min (ANR)
Other diaphragm: 4200 L/min (ANR)
Maximum Size Solid Maximum 8 mm Maximum 8 mm
Suction Head Lift NDP-H50B○T: 3 m Others: 5 m NDP-H500BST:
2.2 m
Others: 4.3 m
Net Weight NDP-H50BAT: 33.5 kg
Others: 35.2 kg
NDP-H50BST: 54.0 kg
Others: 57.5 kg
NDP-H50BFT: 58.5 kg
Others: 62.0 kg
NDP-H50BPT: 32.5 kg
Others: 34.0 kg
NDP-H500BST:
55.4 kg
Others: 57.6 kg

*1 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.

*2 The water discharge is provided as a rough approximation only. It will differ depending on the usage conditions, etc.
*3 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.

Dimentional drawing

Performance curve

Downloads

Parts List

Back to products list