NDP-20-E series
Lightweight and Compact! Simple Structure and Easy Maintenance
This model has a built-in high-frequency transmitting proximity sensor.
This diaphragm pump operates by detecting a sensor and controlling the switching of a solenoid valve. Fully self-suction type that can pump out fluid efficiently, with no pump-priming required.
The NDP-20-E series has a nominal diameter of 3/4" (20 mm) and a maximum flow rate of approximately 82 L/min.
The maximum size solid is 2 mm or less.
*The NDP-E series Is Not Explosion-proof.
This Series Is Built-to-order, So Be Sure to Confirm the Delivery Date.
■ Main Applications
Transfer of Inks and Pigments/Circulation and Spraying of Mold Release Agent, Pumping Out Factory Wastewater and Waste Oil/Supply of Paint to Roll Coater/Transfer of Clay and Glazes/Supplying Oil, Coolant Fluid, Paint, Etc.
Features
■ Sensor Control Model with Built-in Proximity Sensor that Transmits High Frequencies
The sensor built into the pump detects the stroke end, and the pump controller switches the solenoid valve to operate the pump.
◆ Sensor Control “Proximity Sensor”
| Sensor Control = Stable Reciprocating Motion |
|
A proximity sensor detects the stroke end of the diaphragm, and the pump controller receiving the sensor signal controls the switching of the center exhaust type 3-position 5-port solenoid valve. |
|
Optional Counter Connection Enables Stroke Management |
|
By counting the number of times the center rod has moved, it is possible to determine when parts need to be replaced. |
Specifications
| Body Material | A: Aluminum (ADC12) |
S: Stainless Steel (SCS14) |
P:GF Polypropylene (PP-GF) |
|
| Diaphragm Material | ||||
| C: Neoprene (CR) |
NDP-20BAC-E （853097） |
NDP-20BSC-E （853104） |
NDP-20BPC-E （853111） |
|
| N: Buna N (NBR) |
NDP-20BAN-E （853098） |
NDP-20BSN-E （853105） |
NDP-20BPN-E （853112） |
|
| E: EPDM | NDP-20BAE-E （853099） |
NDP-20BSE-E （853106） |
NDP-20BPE-E （853113） |
|
| V: Viton(R) (FKM) |
NDP-20BAV-E （853100） |
NDP-20BSV-E （853107） |
NDP-20BPV-E （853114） |
|
| T: PTFE | NDP-20BAT-E （853101） |
NDP-20BST-E （853108） |
NDP-20BPT-E （853115） |
|
| H: Hytrel(R) (TPEE) | NDP-20BAH-E （853102） |
NDP-20BSH-E （853109） |
NDP-20BPH-E （853116） |
|
| S: Santoprene(R) (TPO) | NDP-20BAS-E （853103） |
NDP-20BSS-E （853110） |
NDP-20BPS-E （853117） |
|
| Wetted Parts Material | ||||
| Ball Valve | Same as the diaphragm material | |||
| Valve Seat | SMS1025 | SUS316 | PP-GF | |
| Valve Stopper | ADC12 | SCS14 | PP-GF | |
| Center Disk | NDP-20BAT-E: A5056 Others: SUS316 |
SUS316 | PP-GF SCS13 (Insert material) |
|
| Specifications | ||||
| Nominal Diameter | 3/4"（20 mm） | |||
| Material Connection | Rc 3/4 | |||
| Rc 3/4 | ||||
| Air Connection | Rc 3/8 x 2 (Shared supply and exhaust port x 2) *1 | |||
| Air Supply Pressure | 0.2~0.7 MPa *2 | |||
| Maximum Discharge Pressure | 0.7 MPa | |||
| Water Discharge/Cycle | Fluorine resin diaphragm: 240 mL *3 Other diaphragm: 350 mL *3 | |||
| Maximum Flow Rate | Fluorine resin diaphragm: 63 L/min *4 Other diaphragm: 82 L/min *4 | |||
| Maximum Air Consumption | 1000 L/min（ANR） | |||
| Maximum Size Solid | 2 mm以下 | |||
| Suction Head Lift | NDP-20B○T-E: 1.5 m Others: 3 m | |||
| Net Weight | 8.0 kg | 13.0 kg | 7.0 kg | |
*1 The pipe length from the air supply valve (solenoid valve, etc.) to the pump shall be 1.5 m or less. If piping from the exhaust port of the air supply valve to another location, the pipe length to the end of the exhaust port shall be 5 m or less.
*2 The maximum supply air pressure for a type with a resin-made pump body will depend on the liquid temperature.
*3 The water discharge is provided as a rough approximation only. The discharge will differ depending on factors such as the liquid to be transferred and the piping conditions.
*4 Maximum flow rate is a value indicating the pump capacity. We recommend selecting a size that allows some leeway, taking into account the impact on the life span of the diaphragm.