DP-FE/D series

■ Seal Specification

Standard Seal A PVC seal that absorbs changes in the dimensions of the join section for the fluorine resin pump.

■ Non-Metallic Specification

One-piece Diaphragm Center disk less diaphragm with integrated center disk and diaphragm. Replacement is extremely simple, and it has excellent running costs.	Resin Center Rod By using resin as the center rod material, non-metal is achieved.

■ Employs Fiber-optic Stroke Sensor Control.
Employs a fiber-optic stroke sensor control model that can be used even in explosion-proof areas.

◆ Sensor Control “Fiber-Optic Stroke Sensor”

Non-metal, Explosion-proof Model By including a fiber-optic stroke sensor, the pump can be used in explosion-proof areas.

Sensor Control = Stable Reciprocating Motion A proximity sensor detects the stroke end of the diaphragm, and the pump controller receiving the sensor signal controls the switching of the center exhaust type 3-position 5-port solenoid valve.

Optional Counter Connection Enables Stroke Management By counting the number of times the center rod has moved, it is possible to determine when parts need to be replaced.

Valve Shape and Model Number
Ball Valve		DP-10FE/D (Material connection: Screw) (853610)	DP-10FE/D (Material connection: Flange) (853626)	DP-20FE/D (Material connection: Screw) (853611)	DP-20FE/D (Material connection: Flange) (853627)	DP-25FE/D (853602)	DP-38FE/D (853608)
Flat Valve		Built to order, so please contact us.
Body Material
Center Body		Polypropylene (PPG)				HDPE, Polypropylene (PPG)
Pump Body		PTFE
Wetted Parts Material
Diaphragm PTFE		PTFE
Valve PTFE
Valve Seat PTFE
Valve Stopper PTFE
Center Disk PFA		Integrated with diaphragm
Specifications
Nominal Diameter		3/8" (10 mm)		3/4" (20 mm)		1" (25 mm)
Material Connection	Suction Port	Rc 3/8 (F)	JIS flange 10K 10A equivalent	Rc 3/4 (F)	JIS flange 10K 20A equivalent	JIS flange 10K 25A equivalent
	Discharge Port
Air Connection	Supply Port	Rc 1/4 x 2 (Shared supply and exhaust port x 2) *1				Rc 1/2 x 2 (Shared supply and exhaust port x 2)*1
	Exhaust Port
Air Supply Pressure		0.2~0.5 MPa *2
Maximum Discharge Pressure		0.5 MPa
Water Discharge/Cycle		60 mL *3		180 mL *3		300 mL *3	560 mL *3
Maximum Flow Rate		20 L/min *4		45 L/min *4		60 L/min *4	70 L/min *4
Maximum Air Consumption		350 L/min (ANR)		450 L/min (ANR)		900 L/min (ANR)	1000 L/min (ANR)
Maximum Size Solid		Maximum 1 mm *5		Maximum 2 mm *5		Maximum 3 mm *5
Viscosity Limit		Maximum 1 Pa·s		Maximum 2 Pa·s		Maximum 2.5 Pa·s
Temp Range	Ambient	0~70 °C
	Liquid Temperature	0~80 °C
Noise Level		82 dB		85 dB
Net Weight		6.3 kg		13.8 kg		28.4 kg	51.0 kg

*1 The pipe length from the air supply valve (solenoid valve, etc.) to the pump shall be 1.5 m or less. If piping from the exhaust port of the air supply valve to another location, the pipe length to the end of the exhaust port shall be 5 m or less.
*2 The compressed air quality shall satisfy quality classes both 2 and 3 specified in “JIS B8392-1:2000 Compressed air for general use.”
(Maximum particle diameter: 1 μm, Maximum open air pressure: －20°C, Maximum oil concentration: 0.1 mg/m3)
The maximum supply air pressure of a type with a resin-made pump body depends on the liquid temperature.
*3 The water discharge is provided as a rough approximation only. The discharge will differ depending on factors such as the liquid to be transferred and the piping conditions.
*4 The maximum flow rate is based on test data using a Φ8 x Φ6 x 2.5 m connection air tube, 0.5 MPa of supply air pressure, purified water, head 0, and at room temperature. However, the DP-25FE and DP-38FE are based on test data using a Φ12 x Φ10 x 2.5 m connection air tube and 0.7 MPa of supply air pressure.
*5 The flat valve type cannot handle slurry. • In the case of standalone pump sales for the DP-FE/D series, only a 5.0 m sensor cable is included, and the pump controller (MFC-24), solenoid valve, etc. are sold separately.

Download LiteratureCatalogs and Various Manuals